sfeakes

Oh. One other thing I see looking at the images, and not knowing your exact pool equipment setup. Is maybe the heat pump is configured to only come on while...

If I understand your problem correctly. When you hit "spa mode" on jandy keypad, it sets pump(s) / JVA's to Spa setting AND also turns on spa heater. But when...

Just posted V2.1.1. That has a config option to link Spa Mode and Spa Heater. Please see documentation / release notes. I've restricted it to just webUI as to not...

No, only one USB is supported. aqualinkd does not talk directly to pump or heater, only to control panel.

That's not the way the RS485 protocol works. There can only be one master on a RS485 network, and that's the control panel. There are many slaves, and Aqualinkd is...

Im not sure I follow you. (BTW, I'm probably the Sean/Shaun you refer to, author of AqualinkD and AquapreD). I'm not avoiding using the same bus, I'm saying use the...

Now I see where you are coming from. ALL devices should be connected to one RS485 bus, then on that bus you have one master (control panel), and all devices...

When installed correctly, your iAqualink interface should be able to talk directly to the RS8, so you should be able to tell if everything is ok without aqualinkd at all....

From the logs, the control panel is sending message to heater, and heater is replying. So all looks normal. So if the control panel is not recognizing the heater, it’s...

@timelery The Jxi protocol hasn't been fully worked out yet. As soon as I get some logs from the unit when it's being controlled from a control panel, I should...