Sensei

If you want it to land 200 meters in from not of you, you may want to increase the alternate distance from 5 meters to maybe 100 or more. Unfortunately,...

Here's a hex you can test with: https://drive.google.com/file/d/1vhjrdq4k-fncDSBmzar3UKX83oADl7-f/view?usp=share_link

Yeah, as landing lights (full white), they'll draw about 5.5 amps. > 320 bytes looks like a very small amount of memory. The 722 and 411 are already full. Features...

See #9701 for possibly implementing this.

Note you _can_ do as many motors as you want in any positions you want. It just doesn't have a pretty interface to do so with a couple clicks. Suppose...

When setting up your custom motor positions: Motors in the rear get positive pitch values. Motors in the rear, negative pitch values. Motors on the left get positive roll. Motors...

> There are many options on the market, and the performance of them are good as well. Any in particular you have in mind?

From the Matek product page: `Softserial_tx1 is enabled on Tx2 pad by default for Frsky SmartPort telemetry. If using CRSF protocol receiver(TBS, ELRS etc), CPU based serial port(softserial) should be...

I would triple check with SoftSerial definitely turned off. The firmware doesn't have specific code for "CRSF on uart2". Uart2 could be broken in the firmware, or CRSF could be...

Email replies to Github issues don't carry the screenshots. Can you please attach those via the Github web site. Particularly your ports tab, because the attached diff indicates there may...