Sensei

It would be awesome to be able to use Inav in the sim.

I had already implemented this target and most of it matches what I got. However there are a few differences. @dlt2018 are you on Discord or somewhere we interact better...

@marbalon If you're still around, can you take a look at descriptions for the eLeReS settings? You may be the only one who understands them.

Checks now pass.

> That way it would pull all the dependencies in and you're then not stuck with trying to maintain a whole set of dependencies in an environment when things change...

If the movement is right except upside down, try adding180° to roll and pitch. Changing one axis always effects one other axis. You wish to swap one axis, but doing...

Sounds like mixer issues. Can you please attach a screenshot of your mixer. Also double check that the motor and servos are actually attached to the outputs shown in your...

The first thing I would check with a multimeter is remove power and check continuity between each pair of adjacent pins. If you find continuity between pins, also check continuity...

You might also choose to drop a note to HGLRC. Normally the best way to get their product supported is for them to be involved. https://hglrc.freshdesk.com/support/tickets/new

We could potentially move the elevators into position while the throttle is low. As you saw, with autolaunch, the throttle should be raised to allow the motor to idle *before*...