Scott Peterson

This is _**not**_ listed in the initial [gateway project requirements](https://pad.ceph.com/p/rbd_nvmeof_requirements) The gateway must be able to support NVMe/TCP and NVMe/RoCE connections from hosts simultaneously. The gateway should be able to...

This is one of the initial [gateway project requirements](https://pad.ceph.com/p/rbd_nvmeof_requirements) The assumption is that gateway nodes will be paired for failover. Larger failover groups are also useful, but not specifically required.

This is one of the initial [gateway project requirements](https://pad.ceph.com/p/rbd_nvmeof_requirements) The requirement says "Handle configuration updates (creates, deletes, etc.) in the order of around 5 updates/sec on average at the Ceph...

This is one of the initial [gateway project requirements](https://pad.ceph.com/p/rbd_nvmeof_requirements) When there are many gateway nodes, and/or many fabric ports or transport options in each gateway node, some of these will...

This is one of the initial [gateway project requirements](https://pad.ceph.com/p/rbd_nvmeof_requirements) Host IO performance (latency, IOPS, and transfer rate) via NVMe-oF to the ceph gateway should be within 5-10% of the same...

This is one of the initial [gateway project requirements](https://pad.ceph.com/p/rbd_nvmeof_requirements) The gateway must not require ADNN (#65) support in hosts. That's true whether ADNN becomes part of the NVMe standard or...

This is one of the initial [gateway project requirements](https://pad.ceph.com/p/rbd_nvmeof_requirements) A gateway node may use more than one SPDK target app to reach the goal of 5-10K total namespaces.

This is one of the initial [gateway project requirements](https://pad.ceph.com/p/rbd_nvmeof_requirements) Some users (especially those using ADNN #65) will benefit from running gateways in every OSD node. The gateway should be able...