Richard Bowman

I really need to update this for the double-ended tool in the next release...

 [Elastic Band_X-ray_Vision.pptx](https://github.com/rwb27/openflexure_microscope/files/1380031/Elastic.Band_X-ray_Vision.pptx) With thanks to Stoyan Smoukov; hopefully these will help as an interim measure.

Hi @Cavada76, that shouldn't be too tricky, though to be honest my usual approach is to put some electrical tape over the hole before pushing the motor in - the...

PS this includes the changes in my other PR #463 so I will close it now.

No problem. I have some code that does exactly that as [part of my microscope control scripts](https://github.com/rwb27/openflexure_microscope_software/blob/saved_settings/openflexure_microscope/utilities/recalibrate_microscope.py) but I will try to chop it out into a stand-alone script. The...

hmm, you may be correct there - that would explain a few things. I think the middle ones are probably both green but I may have R and B swapped,...

Hi Marc, that's a good point - I've tried to keep the fork "clean" to make it easy to pull back into the main PiCamera release. I do, however, have...

Oh, and while I'm here, for those of you interested in calibrating a camera, I've now written a closed-loop calibration script that works much better than my first attempt (which...

Excellent, glad that worked! If you've installed the openflexure_microscope library, it's best to run it from the command line. It will try to talk to a motor controller on the...

Hi Zoltan, It’s great to hear this has been useful to you! The short answer is that a more sophisticated correction is needed because of the Bayer filter. The sensor...