Richard Bowman

Thanks for posting - that's awesome :) I was going to check the code to see if those holes were accidentally larger, but you've beaten me to it. Thanks! I...

thanks - that is interesting. For me, the biggest one that worked was 3.2 or 3.4, so it's really not that different. Trying it out on the actual stage would...

Just for the record, the [line that makes the holes](https://github.com/rwb27/openflexure_microscope/blob/master/openscad/main_body.scad#L205) is definitely trying to make them the same as the others. I know you checked that already, just wanted to...

Also, I checked a few of my printed bodies - I hadn't noticed before, but the trylinder holes in the stage are definitely looser. Mine just about work, but I...

The repository is [moving to GitLab](https://gitlab.com/openflexure/openflexure-microscope/), and this issue has been migrated. I'll close all the issues here in due course, but am leaving notices on all the currently-open ones....


Update: I remembered the lower focal length incorrectly, it's 5mm and 13mm diameter (with an aperture of about 8mm I think). The order details are below: 

It's worth noting that these lenses are fine in the condenser - but don't expect them to produce a nice image, I tried and they are very far from perfect!

Sure. In fact, my favourite option at the moment (at least until we have a nice mechanical assembly for the condenser) is the one in the cantilevered_objective_mount branch, which just...

For the record, the illumination I mention above is now in master. It is not Kohler illumination, but it's critical illumination with a diffuser - which is adequate for most...