Richard Bowman

For my reference: while this repo is currently quite full of images, etc. it might be worth using a [sparse checkout](https://askubuntu.com/questions/460885/how-to-clone-git-repository-only-some-directories) to download the SCAD files to the container -...

I thought I'd add some comments in case they are helpful: * I've now got a halfway sensible build script that will retrieve the OpenSCAD files with a sparse checkout,...

Ah, yes - I always use separate motor power. I think the v2 Sangaboard does have an unfortunate connection between the 5v pin on the Arduino and the 5v motor...

I think you commented in the build report #102 that you used the power directly from the Pi (I guess the 0v and 5v GPIO pins?). I've not usually done...

did you get this working in the end? I think from your build report you might have done? I should have added that my usual solution to having too few...

The repository is [moving to GitLab](https://gitlab.com/openflexure/openflexure-microscope/), and this issue has been migrated. I'll close all the issues here in due course, but am leaving notices on all the currently-open ones....

Bonus points for integrating this with a build script (#22) so we generate a BOM, DocuBricks documentation, and a folder of STL files for each possible set of options. In...

Since swapping to Markdown instructions, hopefully this is clearer - though still not perfect. Once we build the instructions and add an automatic BoM, customising them should get easier.

Thanks for this - I should have changed the clamp holes a while back! My one question is whether it makes sense to include the riser on the microscope, or...

thanks for flagging that up, I should definitely update the instructions. The side that normally faces the camera sensor should face the sample, so the side that normally faces out...