rts18

When save is pressed data is written to the eeprom. It is expected behavior to observe the RX link drop temporarily, along with other functions when data is saved. >At...

Thanks for adding the issue MrD. The post above describes what occurs. But I discovered that having a mixer profile or PID profile within the model settings, makes it manifest...

> or with a disarm save time delay > 5 s (in flight rearm timeout time) ? I like that solution. > This would also be an issue with Servo...

> inav seeing a large departure by gps, apparently continued to take the copter in the wrong direction by compass. The base navigation engine INAV uses, was implemented over 5...

I concur with your observations gentlemen. I too have experienced the matters. Both loading 2 or 3 profiles. And more so of late, since the GCC13.2 tool chain commit.

@DzikuVx Why was this closed? The issue @stronnag has described in the previous posts has not been resolved. >The problem is serial overrun due to the configurator not "pacing" the...

@RomanLut I've been watching this pull request along with #2025. I was one of the people who pointed out the alignment tool had issues. I would like to send a...

@breadoven Same results here.

@spatzengr If you find some time. Can you please take a look at this issue. Possibly caused by #86

> I don't think that is the problem here (or not the entire problem) For one thing, BBV5 can render the FFT with scale without a problem from the same...