Ethan Johnston

hmmmm do you have a newer radio than me

because the display may have changed

there are pins used to tell the revision number

the LCD code is in ltdc.c

looking through the opentx code the timing does not change for the t16

the pixel clock could be two high there's lots of poisible issues. I will look at the opentx code again.

OK i made changed the LCD Timing to better match OPENTX code still works on my radio with the new timing. i will close the issue if you test it...

This was mainly just experimental code i would build off into something. Interrupts will work it would take a few changes.

well its mostly just the IR transmission code only as of now. this is a project i intend to come back to after the silicone shortage gets better..

this is on a raspberry pi 4 with 64bit os