Rob Reuss

BTW, the Arduino code I reference above works with the same chip using an Arduino with a variable resistor.

I'm guessing that I tried sending single bytes at some point - I was trying everything - but don't recall for sure. When I get back to working with that...

I'll try following some of the steps in the thread you reference and see if I can get SP1 working and if not just use some GPIOs. In using the...

I've managed to get two of the four encoders working. Where I'm using regular GPIO pins for slave select I'm getting what looks like good data, while the ones I'm...

I got it working using generic GPIOs instead of CEs, so no problem. Thanks.

I should mention why this change is frustrating to me. As far as I can tell, the result is that there is no way to create dynamically defined/named services at...

I'm on Xcode 12 and iOS 14, and it only impacts iOS devices in my experience, thought I suspect macOS. It has had not any impact on my Linux applications....

I think this issue might be related: https://github.com/Bouke/NetService/issues/31 In that case, I seem to have put in place logic that prevented the library from attempting resolve twice, so I'll dig...

I did some debugging with `dns-sd -B` and `dns-sd -L`. Browsing successfully sees the service I want to resolve, but when I attempt to resolve using "-L", I get a...

I corrected the arguments but I'm getting a "-1" error message: ```^Cpi@goose:~/Development/PanTilt avahi-browse _RemoteLogging._tcp. --resolve --verboseal Server version: avahi 0.7; Host name: goose.local E Ifce Prot Name Type Domain +...