rhammen

@jopie255 @DonPrimo12 Please test with the latest version [2025.10.01-Beta](https://github.com/BenPru/luxtronik/releases/tag/2025.10.1-beta). I hope that has improved the detection. I will close this issue for now. In case you still have problems when...

I refer to my comment on Oct 22, 2024 in #280: "So with FW3.79, still ID_Einst_BWS_akt needs to be used (as does the 2024.10.5-Beta luxtronik integration) **This means any change...

Update the integration to v0.6.3 or v0.6.4-beta1

@Taijian Do you still experience this problem? Maybe a luxtronik firmware update resolves this for your setup, did you try that?

@nicoslav1997 Which version did you use? Make sure you are using the latest Beta-version, 2025.1.4-Beta. https://github.com/BenPru/luxtronik/releases/tag/2025.1.4-Beta

Settings --> System --> Logs. Then, using the search-bar at the top of the page, search for "luxtronik"

When I create a "Entities Card" tile for "DHW Target"on a dashboard, and modify its value, I can observe that the value is changed on the heatpump. So for me...

> > Did you try writing parameter 105: Celsius("ID_Soll_BWS_akt", True), and does that change the hot water temperature on the heatpump? >Did you try to set hot target temperature by...

@Kars-de-Jong @blue-bean Ok, based on your comments I understood I tested something slightly different than you did. So I now modified again ID_Soll_BWS_akt from within HA, and I checked the...

Results of my test with FW3.79 I set ID_Soll_BWS_akt = 51 from HA. ID_Einst_BWS_akt is then NOT automatically changed, and remained at 53. On the heatpump, the top temperature is...