Remco Burema

Single layer file behaves oddly in 3.6 and 4.0 (at least)

1

When reviewing the latest version of the plugin, I first tried with the attached file, which only prints a single layer. [really_late_m900.3mf.txt](https://github.com/fieldOfView/Cura-LinearAdvanceSettingPlugin/files/5232752/really_late_m900.3mf.txt) It seems it attaches the 'M900' line near...

profile selector dropdown overlaps view selection in older Cura's

4

Plugin version: 4.2.0 (as submitted) Cura versions: (at least) 4.0.0, 4.1.0 See screenshots:  

See (also) [frontend PR](https://github.com/Ultimaker/Cura/pull/12512). (Requirement for nightly builds.)

[CURA-9357] Remove some very hard settings from frontend.

1

Turns out these are way too complicated for any public consumption. See frontend PR: https://github.com/Ultimaker/Cura/pull/12651

[CURA-9178] Port external Voronoi fixes

2

Workarounds and fixes for certain Arachne foibles. Mostly to do with crashes due to improper Voronoi generation by Boost (or pre-processing necessary for that). See individual commit messages for greater...

[CURA-9367] Add forced concentric skin in removed areas.

1

Areas removed by Skin Removal Width get filled in with 100% Concentric Fill.

Periodically merge main into the other branches & push, if possible.

Put note in gcode if min layer time has been applied.

1

Will help with finding issues, debugging, and pointing out (the reason behind) unintuitive results to users, caused by the minimum layer time feature ('cool_min_layer_time').

Periodically merge main into the other branches & push, if possible.