radius75

Looking at it more closely.. after pausing and starting the same or different TAP playback from the beginning, the Resume option is still displayed.. even though the playback is in...

After starting Pause, Resume.. and Stop... options appear. Using the Stop... option stops the TAP playback permanently. But after that, the Resume.. and Stop.. options are still visible and available,...

As I thought :) And the pause option during [Capture save to TAP] doesn't appear at all, I guess it's redundant, but I don't know what the assumptions were. --...

Is the C-3 (Motor Control) signal from the tape recorder connector passed through the Tape Adapter cable and the state of this C-3 can be read by Ultimate2+?

I tried but couldn't reproduce it on U2+ 3.10f Are you using Jiffy rom for both C64 and 1541Drive? You run the first disk with the RUN DISK option? You...

I tried Maverick once and it didn't work. Finally, I copied two copy-protected floppy disks with TurboNibbler4 The first g64 created was unreadable on Ultimate but worked in Vice. It...

Only now I noticed that we are talking about the Single Copy option. You probably damaged the source floppy irreversibly in this way. Read from 08 and write to 08....

> > Have you tried copying the disk using real target hardware? Does the resulting copy/disk work if you copy it that way? > > yes, since I just tried...

I tried copyprotected g64 to g64 on Maverick (35track). From DriveA.08 to DriveB.09. The copy was successful. GCR Nybble Copier / Dual Nybbler New destination g64 placed in Temp folder....

I tried copy real floppy to g64. From 1541-II.08 to destination g64 DriveB.09 (DriveA disabled). New destination g64 placed in Temp folder The output g64 is corrupted. Uploaded both files...