Victor

Depends on the resistors installed in the adapter or LEDs on the RX input.

Pin PD3 (OUT) --> RESET The RESET pin of the microcircuit must be connected, and option `-t100 -a100'. Zigbee firmware turns off power to Flash when sleeping. And the processor...

Without RESET: wait up to 11 seconds for the SoC to wake up, pause the processor, do not use RESET with an activation time of 70 ms. ``` TlsrPgm.py -p...

``` _ _ ____ _ ____ _ | \ | | _ \(_) | _ \/ | | \| | |_) | | | |_) | | | |\ |...

1) TLSR825xComFlasher.py -t5000 ... Usually, the device wakes up during this period. BLE beacon max 4 sec... 2) If there is no access to reset pin -> Power supply of...

Not all types of USB-UART chips work with Telink Swire emulation. Only Chinese USB-UARTs. Not FTDI - FTDI filters invalid UART characters... The RX input of the USB-UART adapter must...

This repository is dedicated to Telink-SWire hardware programmer based on TLSR8269/825x chips... And I don't quite understand your question... Is it about a different type of programmer? A reset or...

All available information on SWire (SWS/SWM) is posted here: https://github.com/pvvx/TlsrTools/blob/master/DOCs/SWM_S.pdf Everything else is reengineering...

TLSR8266 - SWire addres 16 bit TLSR825x - SWire addres 24 bit

> Is it get by sniffer the official download tools or from some spec? [Double:](https://github.com/pvvx/TlsrComSwireWriter/issues/2#issuecomment-743280804) _All available information on SWire (SWS/SWM) is posted here: https://github.com/pvvx/TlsrTools/blob/master/DOCs/SWM_S.pdf Everything else is reengineering..._ ---...