Victor
> Are temperature and humidity detected correctly? Defective or fake sensors are installed on variants С401 from Azarton. The data is sent to a different I2c address (0x00).
Added CGDK2 in [TelinkMiFlasher.html](https://pvvx.github.io/ATC_MiThermometer/TelinkMiFlasher.html)
Added test version MHO-C401(N), where N is release from 2022. MHO-C401 have 3 global hardware modifications...  [TelinkMiFlasher.html](https://pvvx.github.io/ATC_MiThermometer/TelinkMiFlasher.html) https://github.com/pvvx/ZigbeeTLc
Из просторов инета есть прошивка ZigBee для LYWSD03MMC. Работает с Xiaomi Gateway 3, но потребляет много. Прикидывается 'Zigbee WSDCGQ11LM (lumi.weather) Aqara'. https://disk.yandex.ru/d/D60QI_ZfJBh16w Перед прошивкой стереть всю Flash, потом записать этот...
> For example, the BLE custom firmware displayed the last part of the MAC address upon boot - nice feature to rapidly identify the device. Zigbee has an "identify" function....
For double flashing, you need to use a random MAC. Otherwise, there will be problems described [in this issue](https://github.com/devis/z03mmc/issues/22#issuecomment-1778861095 ) Для двойной перепрошивки требуется использовать случайный MAC. Иначе будут проблемы,...
**Starting from firmware version v4.6, all thermometers in [TelinkMiFlasher.html](https://pvvx.github.io/ATC_MiThermometer/TelinkMiFlasher.html) (v6.9) support BigOTA.** BigOTA is enabled if the OTA file is larger than 128 kilobytes. BigOTA download occurs at address 0x40000....
После прошивки Zigbee необходимо использовать выход RESET при запуске «активации» в любом программаторе! Прошивка Zigbee полностью отключает Flash во время выполнения в режиме глубокого сна и настраивает защиту от записи...
Without hardware improvements, it is impossible to increase the output of the transmitter. There is not enough CR2032 battery current. It will only work for the first few days on...
+3 dB is the limit for Xiaomi LYWSD03MMC with CR2032. This already requires the installation of a capacitor in the place provided by the developers on the printed circuit board....