powaking

> The BURST mode does work with the 0.6 plipbox.device (and 0.6 firmware) on the A1200. I noticed that the echo command posted above fails because the sana2 directory does...

What worked for me was to set the NOBURST in envarc:sana2/plipbox.config file. This is on my A1200, Pistorm32 and MiamiDX/Genesis. Although with Genesis I had to set a static IP...

I sometimes would have to do that. My plipbox has a Nano on it with a reset switch. Sometimes that works but when it doesn't then doing a full power...

Interesting, I'm able to click on the link myself. I will reupload it here as well as messages log file showing the error. [dmesg.txt](https://github.com/user-attachments/files/20639237/dmesg.txt) [messages.txt](https://github.com/user-attachments/files/20639259/messages.txt)

Interesting. The device is mainly used for media consumption (Plex) and at the time it was hardly used. Its also in the basement where its relatively cool. What I didn't...