Pierre-Louis Bossart
Pierre-Louis Bossart
This is the first step to enable multi-stream capture as a reference for topology1 platforms. Before splitting streams, we first need to split the capture pipelines in two. The modified...
**Describe the bug** Running sof-test with SOF 2.2 production-signed firmware results in failure for all capture tests FAIL: capture-d100l1r1; capture_d1l100r1; capture_d1l1r50; This is on a device with Fedora 36 installed...
**Describe the bug** The sof-wm8804 machine driver is used to put together an APL-UP2 board with an HifiBerry Digi+ HAT board. This worked fine for several years. With firmware updates,...
**Is your feature request related to a problem? The Chromebook topology1 files are not aligned with the others, specifically they do not rely on the mixer pipelines and cannot support...
Kernel oops detected by Intel test 4819 on CML_HEL_RT5682 Test Case URL: https://github.com/thesofproject/sof-test/tree/master/test-case/check-kmod-load-unload.sh cmd: TPLG=sof-cml-rt1011-rt5682.tplg ~/sof-test/test-case/check-kmod-load-unload.sh -l 25 [dmesg.log](https://github.com/thesofproject/linux/files/6703150/dmesg.log) ```` [ 5993.111452] kernel: sof-audio-pci-intel-cnl 0000:00:1f.3: ipc tx succeeded: 0x40010000: GLB_PM_MSG:...
Internal Intel test result/planresultdetail/16234?model=TGLH_SKU0A5E_SDW_ZEPHYR&testcase=verify-kernel-boot-log ```` [ 5.539486] kernel: SDW: Invalid device for paging :0 [ 5.539490] kernel: rt1308 sdw:2:025d:1308:00: ASoC: error at snd_soc_component_update_bits on sdw:2:025d:1308:00 for register: [0x0000c070] -22 ````...
Forking new issue from https://github.com/thesofproject/linux/pull/3933#discussion_r1014175537 discussion: The i915 power management is a bit misleading in the power is turned on/off in multiple places. It's unconditionally turned on/off in hda_codev_i915_init/exit and...
This PR suggests two improvements to set the regmaps to cache-only on probe and when a device becomes UNATTACHED. This should help with transient errors or delays, but this is...
The logic for the ioremap is to find the resource index 3 (IRAM) and infer the BAR address by subtracting the IRAM offset. The BAR size defined in hardware specifications...
Intel internal tests show failures for ?model=WHL_UPEXT_HDA_IPC4&testcase=multiple-pause-resume-50 FW reported error: 6 - Unknown error while processing the request of ipc4 set pipeline 10 state 2 the last working test was...