pitts-mo

I did forget to clear the uart pin assignments on my RP4TD after I reset it to verify problematic signal ... but clearing them did not make a difference ......

Test with PR3302 ddd12d ~2025-10-19. All devices appear to work but I do notice some noise on channel 1. PWM pins = 1,3,18,5 [ddd12d_working-but-noise-on-ch1.sr.zip](https://github.com/user-attachments/files/23692295/ddd12d_working-but-noise-on-ch1.sr.zip)

See the PR3302 sample above. I can re-test again but I did not see any changes since and was merged to master. On Sat, Nov 22, 2025, 20:19 Michael ***@***.***>...

master 277577 still notice issues of: -noise on ch1 (unnoticed long standing issue?) -gaps in Dshot and Dshot3D signal (regression since PR3139 ~2025-10-19) -normal dshot commanding 0048 at zero throttle...

ok, I have tested back and forth a couple times now to verify this. 14872ae introduces DSHOT 0048 @min throttle and gaps in DSHOT and DSHOT3D signal aa42bc2 still functions...

yes aa42bc2 is working. I must have failed to verify firmware update on my early attempt to test aa42bc2.

Is this to copy the resulting firmware.bin to a named file indicating target and source version? eg: firmware.bin = HappyModel_ES24TX_Pro_Series_2400_TX-3.3.0.bin That was a handy feature in prior builds. -p

hmm, I am still observing these same behaviors with https://github.com/iNavFlight/inav-configurator/tree/8.0.0-RC3 re-open this issue until resolved?

The behavior persists on final 8.0.0 release. @MrD-RC Can you please re-open this issue.

Recent PR #3339 inits RX PWM pins low until link is established. This PR will not prevent esp serial activity or other glitches during a reboot event. But seeing LOW...