pitts-mo

Hello @pascallanger, Have you returned from your vacation? Do have time to evaluate the hardware you would need to attempt a build of lua replacement for Spektrum's "Avian Prog"? The...

@jakezilla what model TX and FCC ID is on the TX from your pictures and do you have a 6533 RX to sample with? (6533 appears to be the most...

So far It appears that only TQi TX with FCC ID: XVE-TRX1017 and XVE-SA10044 have been found to be using the CYRF6936 chip. Below is a summary of Traxxas LP...

Yes @M-i-c-h-a-e-l1 , it would be helpful to heat the solder joints and carefully pry each side clear to remove the shield in order to verify what chips are underneath....

@ANiMOSiTYza I do not know of a single tutorial but searching the internet you can find some pieces of how someone decoded/determined bits and pieces of other RF protocols. But...

> Updated my post of 09.03.2024 with a picture of the RF section of the radio. Nice picture. Thank you @M-i-c-h-a-e-l1 for taking the time to verify. -p

To help us proceed I have marked up @jakezilla 's image with the intent of using the larger pads at the STM for sampling. I have reasonably high confidence about...

I feel this protocol will have a powerful draw and the potential to encourage many more users to help branch out our hobbies. Please indicate if you have a Traxxas...

After seeing youtube videos describing Traxxas TQi binding I had also wondered what they were doing. It seems that both the TX and RX are able to store multiple "bindings"...

X9D+ with EdgeTX 2.8.x I still can't get the lua to run first run results in message: Script syntax error not enough memory additional runs result in top bar reporting:...