ph1lj-6321

That particilar example (the S-R latch) does not work by default with the new toolchain (it is not a problem related to IceFun board). It worked ok with the old arachne-pnr tool, but when it was upgraded to nextpnr it stoped working. This new tool, by default, does not allow to have combinational loop. Of course, this can be overrided using the --force or --ignore-loops flags when invoking nextpnr:

7

That particilar example (the S-R latch) does not work by default with the new toolchain (it is not a problem related to IceFun board). It worked ok with the old...

ERROR - Just test this with both FunICE and Bx

12

Use apio 0.5.6, I get the error as seen in the image - if I use 0.4.1 however on the the BX at least all is good  A...

How did you compile the Mlx90649_driver.cpp - do I need the bcm8235 lib installed ? - I have tried Geany on the Pi and I get errors. If I test...

Firstly want to say - I really appreciate you efforts with tinyweb, I hope you can help - or point me in the right direction I'm new to using tinyweb...

This ladder code builds and runs on simulator - but I get no output voltage on the physical device Anyone got any ideas ?