ph1lj-6321

Results 10 comments of ph1lj-6321

Program crashes with PiCameraRuntimeError "Timed out waiting for capture to end"

How did you compile the Mlx90649_driver.cpp - do I need the bcm8235 lib installed ? - I have tried Geany on the Pi and I get errors. If I test...

ERROR - Just test this with both FunICE and Bx

I will try it with Apio 0.6 - will let you know

ERROR - Just test this with both FunICE and Bx

Uhm - how do you force it use Apio 0.6.**. I have downloaded and installed through pip - it always default to the older Apio Any ideas ?

ERROR - Just test this with both FunICE and Bx

OK - I'm trying to install the Toolchain now using the 5.1w210224 for win64 build - started OK - seems to get stuck around the 50% mark - showing that...

ERROR - Just test this with both FunICE and Bx

Ok - big step forward, with the above process 5.1w210224 was installed with apio 0.6.0 - Thank you. However the original issue of not building the simple SR example, with...

ERROR - Just test this with both FunICE and Bx

By the way - tried to use the error log, but after the above, my error log folder is empty (yes I did set Preference's Logging enabled.)

ERROR - Just test this with both FunICE and Bx

Also - I just tried the supplied S-R latch (Examples. 3.Gate 05. SR latch) - same thing with both the BX and IceFUN boards

That particilar example (the S-R latch) does not work by default with the new toolchain (it is not a problem related to IceFun board). It worked ok with the old arachne-pnr tool, but when it was upgraded to nextpnr it stoped working. This new tool, by default, does not allow to have combinational loop. Of course, this can be overrided using the --force or --ignore-loops flags when invoking nextpnr:

How can I add this --ignore-loop flag ?

That particilar example (the S-R latch) does not work by default with the new toolchain (it is not a problem related to IceFun board). It worked ok with the old arachne-pnr tool, but when it was upgraded to nextpnr it stoped working. This new tool, by default, does not allow to have combinational loop. Of course, this can be overrided using the --force or --ignore-loops flags when invoking nextpnr:

Oh - can you please give me an example of how I can override this using the command line, I'm using 0.6.0 now with the IceStick Eval kit, module.

That particilar example (the S-R latch) does not work by default with the new toolchain (it is not a problem related to IceFun board). It worked ok with the old arachne-pnr tool, but when it was upgraded to nextpnr it stoped working. This new tool, by default, does not allow to have combinational loop. Of course, this can be overrided using the --force or --ignore-loops flags when invoking nextpnr:

Hi I dont seem to be able log in any more - perhaps Admin can close it Philip Jarvis Professor, School of Science and Engineering Technology Electronics Department Durham College...