Peter Feerick

You'll find when it resets to 1970, most likely it will be 2000 on the next boot... since 1970 is the default date of the RTC, and is from before...

I would think so, it just seems unusually quick for it to drop from 3.33v to 3.08v - although 3v is the nominal voltage. It should be a lithium primary...

The comment that closed that issue is rather telling also... > It's an hardware problem, please contact FrSky (the 100uF is not enough, they will use a 470uF instead) The...

Glad you got it working, good to know for myself also. I knew on the upcoming EL18 with AFHDS3 rebinding with the same RX number was a problem (as there...

Yaml files are text files. You can use notepad to open them. The other way to correct this is to go into model 8 (Eachine P-51D), model settings -> special...

@philmoz Any chance you can rebase and resolve the conflicts that will arise on the colorlcd side? Also taking this comment about the display of values into account. https://github.com/EdgeTX/edgetx/pull/2096#issuecomment-1203226844 I...

> Have not fixed the B&W issue. There isn't one AFAIK... on B&W, you long press enter in weight/offset fields for GVs, and that is working as expected. The only...

@elecpower Sorry to distract from #4406, but regarding this PR, I finally realised what the issue you was referring to was here... i.e. Companion and radio firmware are at odds...

Indeed... that is really what I want to avoid. How it is done in limitData and srcRaw -> curve (i.e. GV#/-GV#) IMO is the most appropriate then in this case,...

Correct - this issue is focused on the TX16S - which stores all model and radio settings on the SD card (as do all other colorlcd radios). So if for...