Roman Passler

Thermal Performance Tests

4

### Introduction: Our aim was to conduct a thermal investigation of the BMS to determine how hot it gets at a current of 100 A or more. ### Test Setup:...

Voltage spike damaging LMR during power-on with power supply and electronic load

6

During recent testing #67 of the short-circuit shutdown via MOSFETs on the BMS C1, I noticed an issue where turning on the lab power supply with an attached electronic load...

### Description The short-circuit test was performed to evaluate the behavior of the BMS under fault conditions and ensure proper protection mechanisms are in place. The test helps determine if...

Use unused GPIOs when RS485 is deactivated

2

I propose utilizing the currently unused RS485_RE and RS485_R̅E̅ pins when RS485 communication is disabled. These GPIOs could be repurposed to control an external actuator or serve other similar tasks....

Unify formatting with common English abbreviation style