ot-docs

ot-docs copied to clipboard

Disclaimer about router terminology on node-roles-and-types.md

3

Routers are now officially named "Thread Mesh Extenders" on all consumer facing comms. Adding this information here. Q: should we update *all* documentation to reflect the name change or can...

rochaferraz

There was info added to the DATASET readme in the main repo https://github.com/openthread/openthread/pull/10026/files#diff-38fb58c06769c0283e1dd05c06244d63d29561169ca8a2b56166130255467a04 Specifically about restrictions for dataset CLI commands in production. We should add a similar warning to our...

Vyrastas

OTBR Web service is not started?

4

I'm following the steps here: https://openthread.io/guides/border-router/build to install OTBR on a Raspberry Pi 4. At step 5 where one issue the command "sudo systemctl status" the documentation mentions that the...

olavt

Requirement for Raspberry Pi OS with Desktop?

1

Related to this page: https://openthread.io/guides/border-router/docker I think the requirement for using Raspberry Pi OS with Desktop is a bit confusing. "You cannot use the Lite version, as you need to...

olavt

This commit clarifies that the command "netdata show" will not show/publish the full on-link prefix anymore (This change was done in https://github.com/openthread/openthread/pull/8986.) and that instead we will only see fc00::/7...

Alami-Amine

Fixes docker run command to allow host receiving RA packets.

3

This bring small changes for the docker run command to allow the computer (and other devices in the network) to have access to the RA packets. This a result from...

saramonteiro

TCP ports and how to persist data @ Docker

5

I'm running OTBR on Docker. Is it possible to specify: - Every TCP port used. On doc there is just TCP port related to the webgui but, for example, for...

snakuzzo

This updates the OTNS codelab to use the new OTNS2 simulator, which is currently not yet in the OpenThread project Github. The PR for OTNS2 is currently [here](https://github.com/openthread/ot-ns/pull/530). It should...

EskoDijk

It's not possible to run the otbr image on kubernetes

1

I'm looking for what configuration, changes, etc. I can use to run `otbr` on kubernetes. I'd like to get an image to point where all external config can be injected...

dmfrey

OTBR-Docker in combination with a network device

1

Hello, I have a question regarding the OTBR docker. On the internet I find many instructions how to realize Matter-over-Thread with a SLZB-06 in Home Assistant. Unfortunately, I run Home...

hammy1988