Nicolai Shlapunov

I could not connect. This thread: https://forum.evilmadscientist.com/discussion/629/unable-to-connect have some useful information. I was able to connect board using PuTTY, perform the R command and get "OK", I also ran SM,100,100,100...

> This should not break any senders Actually senders already broken. Just tried it with ioSender and looks like it have same issue as my MPG when I streaming g-code...

@terjeio , by the way... I want to send you something. But I need your address. I found one at your website(_in oldstuff section_), but I don't think it is...

> Look at the [old stuff](http://www.io-engineering.com/oldstuff/index.htm) again. Sounds about right. I found this address before somewhere associated with Io Engineering. This is your package:  You can track it on...

> The due for VAT limit in Norway has been changed to 0... But sometimes they let it through without charges. On [this Posten page](https://www.posten.no/en/customs/receiving-from-abroad) there a link to Norwegian...

@terjeio why do you have [such small mailbox](https://sporing.posten.no/sporing/UA106950029US)? 😄

Hi @terjeio , according tracking your [package is waiting for pick up](https://sporing.posten.no/sporing/UA106950029US). By the way, I found "bug" on Posten website: it uses browser local time(_not a Norwegian time_) for...

I have tool setter probe. I ran this program: ``` G38.2Z-5F50 G38.4Z5F50 G0Z10 ``` copy-pasted 30 times. This is the data(_only for G38.2 command_): ``` [PRB:0.000,0.000,-7.026:1] [PRB:0.000,0.000,-7.027:1] [PRB:0.000,0.000,-7.028:1] [PRB:0.000,0.000,-7.031:1] [PRB:0.000,0.000,-7.031:1]...

> **P.S.** By the way, could you check Web Builder? I tried to build hex for my controller, and instead ver 20240228 it shows 20240204. Still respond to pulling TX...

> I have added a quick fix to the Web Builder - select _Test2_ in the new MPG & DRO dropdown in the _Plugins tab_. That works! Thank you!