Andrew Yong
Andrew Yong
- **Describe the scope of your change** - Prevent publishing (return false) if passing a NaN float/double - **Describe any known limitations with your change.** - You won't be able...
- Arduino board: Adafruit Feather M0 WiFi - Arduino IDE version (found in Arduino -> About Arduino menu): 1.6.10 - List the steps to reproduce the problem below (if possible...
`uname -a` output: `Linux doopad-x395 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux` `dmesg` output: ``` [45420.141212] BUG: kernel NULL pointer dereference, address: 0000000000000000 [45420.141217]...
REGULATORY_GAIN is the total system gain in dBm to subtract from the configured Tx power, to remain within regulatory ERP limit for non-licensed operators. This value should be set in...
Is it possible to add a feature to force processing torrents that are already completed? A good companion feature/check to have, is to only allow this feature to be used...
I2C is not defined on schematics, but these are the only free GPIO exposed on the castellated pads. There are pin mux conflicts: GPIO18 = USB_DN and GPIO19 = USB_DP....
Add Heltec HRU-3601 as it's a supported retail device variant.h: https://github.com/meshtastic/firmware/blob/master/variants/heltec_hru_3601/platformio.ini protobuf: https://github.com/meshtastic/protobufs/blob/071fd931ec6679bb21427c872f9839edea63e351/meshtastic/mesh.proto#L340****
- seeed_xiao_nrf52840_kit: Use build flag for L76K GNSS, rename variant.h ifdef - seeed_xiao_nrf52840_kit: Support multiple SX126x pinouts via build flags - seeed_xiao_nrf52840_kit: Pin D0 as user button if pin is...
Feature request: Use a color scale for neighbor lines between 0dB to -20dB(?). That would give more visual feedback for adjusting nodes and antennas than just going directly to red...
### Category Other ### Hardware T-Lora v2 1.6 ### Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)? - [ ] Meshtastic UI aka...