Niles Corder

solved by #87

> thank you very much! haven't tested yet, but that's a good idea Of course! I don't have any other machines apart from my x230 but it should be doing...

> could you add this to every other board REAME as well? I know, we have to share content as some point :) Sure thing, thanks for letting me know....

> you connect the pins from the SOIC clip here https://github.com/merge/skulls/tree/master/x230#open-up-the-x230 to the RPi here https://github.com/merge/skulls/tree/master/x230#hardware-example-raspberry-pi-3 (ignore the 3 UART pins on the left if you don't use them, they...

> I do have plans to continue this project. I didn't renew the jivesearch.com domain so someone else owns that domain now. When I do startup this project again I...

> That's right. -- Sent from a mobile device. Hey Jans23, is it then possible for users to verify/read the firmware running on the device currently? Is the firmware reproducible?

@solidhat I help run a small organization called the EPuters Project. We would most likely be able to aid in basic hosting of repositories ( up to about 500GB+ )...

> For that to happen, it would be necessary to add [Gogs](https://github.com/gogs/gogs) (which is the software that runs NotABug) as an elsewhere platform, so that every Gogs instance would work....

> From https://docs.gitea.io/en-us/oauth2-provider/: > > > To use the Authorization Code Grant as a third party application it is required to register a new application via the “Settings” (`/user/settings/applications`) section...

@nanu-c Is the registration code supposed to be texted to me or is it just the pin from my old signal device/account? I am not receiving a registration code as...