nathanmillermicrostrain

Hi nonlinear, did this fix your problem?

Hi Jad, The rtk_dongle_enable variable only needs to be set if you have 2-way communications with your corrections service and need a NMEA GGA message output. This is typically only...

Jad, 1. We recommend the ros-2.x.x branch... we are in the middle of transitioning the lower layer to our new MIP SDK, and this branch has some bug fixes that...

Hello, What device are you using? If it is a GQ7, you can enable RTK dongle handshaking which will output a GGA message on the AUX port. Note: this will...

Hello, Please refer to the following documentation for pinouts and electrical specifications: https://s3.amazonaws.com/files.microstrain.com/GQ7+User+Manual/user_manual_content/specifications/Main_Aux.htm https://s3.amazonaws.com/files.microstrain.com/GQ7+User+Manual/user_manual_content/specifications/Electrical.htm On a side note... our next firmware release (approximately 2 months out) will have configurable NMEA...

Hello, Yes, we have entered the testing phase for this firmware and will hopefully release it somewhere between the end of the month and mid next month. Nathan

Hello, Yes, we are currently testing the firmware and are a couple of weeks behind schedule for release. We hope to release it in the next 2 weeks. Nathan

Hello, We are getting closer to release, I apologize for the delay, but the many additions in this version have taken longer to test than initially scoped. Thank you for...

Hi Jae, Unfortunately, the USB firmware on the GQ7 device is not supported by Mac currently. You can use a serial-to-USB converter along with our serial cable to connect to...

Hello, Our primary ROS engineer is out currently, but I'll do what I can... The environment is a bit complex for us to recreate, but is it possible for your...