mvgianel

@jasvinderkhurana thank you for your reply. I have compiled the application on the KV260, and it works correctly. The issue is that I would like to make an accelerator for...

> Another possibility is that you're not using the right resources. What confuses me a bit though is that you above report: > > > xilinx-k26-starterkit-2020_2 That was what the...

> @mvgianel then follow guidelines for Ubuntu, not for Yocto. See https://xilinx.github.io/KRS/sphinx/build/html/docs/install.html#ubuntu-22-04. @vmayoral I am following the guidelines for Ubuntu 22.04, and after following them, I ran this example: https://xilinx.github.io/KRS/sphinx/build/html/docs/examples/0_ros2_publisher.html#building-creating-the-raw-image-and-running-in-hardware...

> When you are upgrading to Vitis 2022.1 with Ubuntu 22.04, you might need to upgrade the firmware as well, Please go through the documentation below. On how to update...

@jasvinderkhurana after upgrading the firmware, I was able to use the official Kria Ubuntu 22.04, but I still have the same issue with the image created by following the tutorial.

@ohkawatks Thank you so much for helping! I am working with a KV260 and Ubuntu 22.04 but I followed the steps you delined using the petalinux kv260 image. I also...

Hi @lanyangyang, Thank you for your reply! I was able to get everything working after following your instructions :)

Hi @ohkawatks, Sorry, I misspelled the file extension here, but it was correct on the board. I was not able to see /dev/sda after adding the uEnv.txt and changing the...