mtbsteve
mtbsteve
## Bug report With AC 4.2 and AC 4.1.5, the Solo Gimbal is not available anymore on CubeSolo. None of the mavlink command controls are working. Everything was still fine...
I upgraded to Jetpack 4.4 and now trailnet produces the following error when I launch the caffe_ros node. ``` apsync@apsync:~$ roslaunch caffe_ros ap_zed_ros_trailnet_yolo_robot.launch ..... [ INFO] [1606923230.702484788]: [TensorRT] Layer(SoftMax): softmax,...
Just FYI in case someone is interested - I just completed my implementation of Project Redtail along with a few enhancements to the original project. - Support of Jetpack 4.2.2/ROS...
@Alexey-Kamenev my TX2 is running out of memory when I run the stereoDNN model tests for resnet18 fp16 and fp32. When I run: `./bin/nvstereo_sample_app_debug resnet18 1025 321 ./models/ResNet-18/TensorRT/trt_weights.bin ./sample_app/data/img_left.png ./sample_app/data/img_right.png...
I am trying to set up gscam on my Jetson TX2 with Jetpack 4.2.2 under Ubuntu 18.04. Streaming with gstreamer works perfectly well, but with gscam I receive no image...
A minor glitch - in the current implementation, the D-pad movements seem to be hardcoded to button press events. I fixed this in my code. BTW, thanks again for the...
I do have a primary inverter SE48-RWB with a SE battery, a backup interface and a second slave inverter connected. The integration finds the primary inverter (device id 1), the...
### Describe the bug I do have a setup of 2 inverters, a SE battery and the SE Backup interface. The primary inverter, a SE-10K-RWB48 has the device id 1....
The links to the developer documentation and the tool chain in the readme section are not working. Would be great if they can be updated with instructions how to build...
I installed atcom as described, however I cannot connect to the Telit modem. Any AT commands result in the same error. ``` pi@raspberrypilte:~ $ atcom --port /dev/ttyUSB2 -b 115200 AT...