Michael Singer
Michael Singer
On page 1, the clock input of `AFER` should be driven by `BOGA`, not `BOMA`. `BOMA` drives the inverse clock input though. So in the schematic `BOGA` should either be...
On page 18, the first input of the AND gate `GEDO` is wrongly connected to `BUFY_256Hz`. It should be connected to the `Q` output of the DTFF `FEXU`. I noticed...
On page 18, the output of the inverter `ATOK` just ends in an arrow without a label. It is connected to the wave RAM. I believe it could be the...
On page 18, the inverter `FALU` should be connected to the `!Q`output of the counter cell `GAPO`, not the `COUT` output.
On page 16 and 18 the nets labeled `KUTU`, `KUPE`, `KUNU`, `KEMU`, `KYGU`, `KEPA`, `KAFO`, `KENO`, `KEJU`, `KEZA` and `JAPU` are actually driven by the `!Q`outputs of their respective counter...
On page 16, the inverter `FEVO` should be connected to the `Q` output of DTFF `GUXE`, not its `!Q` output. For the NOR gate `FUVO` the opposite is true: It...
On page 15, the AND gate `KYVO` should have its 3rd input connected to the `COUT` output of counter cell `JORE`, not the `!Q` output.
On page 15, there are no labels on the outputs of the four gates that produce the channel's output. For channel 1&4 those outputs are labelled `CHn_OUTb` (n=channel#, b=bit#). I...
On page 14, tribuf `GERO` outputs into `D4` and `GAKY` outputs into `D5`, not the other way around.
On page 14, the input of tribuf `FOSE` should be connected to the `!Q` output of counter cell `CYVO`, not the `COUT` output.