mohammad reza bayanlou

Using 20 hz GPS

1

Hi I will use a 20 HZ CUAV GPS . I Connected it and it works but i will increase input data rate to 20 hz . in parameters GPS_RATE_MS...

Parachute command needed

5

Parachute command We need using parachute in an emergency such as Stall, and we can’t use the designed plan . also we can not using remote controller beacuse range of...

Add wind speed value

1

Hi I added wind speed to plot for analyzing in fixed wing and VTOLs.

I added tecs alt setpoint for better analysis. there is not need to display thrust in this graph, also thrust scale is different with altitude scale.

Add wind speed value to speed graph

1

Hi For flight analyse wind speed is a major parameter. it can be displayed in speed graph and compared with groundspeed and true airspeed.

Hi For analyzing alt change we need to see tecs alt target like this image. 

feature request: show flight plan with lines and download it

1

Hello we need a feature that show graph of total mission saved in autopilot with lines (like qgroundcontrol) and ability to download it .

Add camera polygon footprint instead of camera trigger icon

10

It is good that we see the camera footprint of each image during the survey. so we can see the area of images and monitor overlap of images during flight....

Display loiter circle for planes in mission planing

6

we can display circle with input radius (like circle of landing pattern) and enter and exit lines to circle but currently display a waypoint for loiter. In mission planning, it...

support RTK for emlid reach GPS receiver

20

we will use emlid reach gps with pixhawk in rtk mode but we can't use qgroundcontrol for sending correction from base station to UAV .