mnpg

For all of you, take a look at this information, you'll better understand : https://www.reddit.com/r/reolinkcam/comments/uvgw9l/reasons_to_run_cameras_through_a_poe_switch/

> it's just a shame these features and switches aren't supported natively through the #NVR. I do agree. The API isn't the same through all the cameras and NVR Reolink...

Onvif port must be open on your E1Outdoor to have the motion detections. With newer firmwares 3.1.x.x, some ports are disabled by default like onvif. Take a look at the...

Reboot your camera and check if it's soluted your problem. Sometimes, not often, my cameras didn't worked properly (well), i need to reboot them to make them fully functionals.

Hi @diogofm7 , This switch works only the the AI cameras because their firmware (3.1.x.x) contain the AudioAlarmPlay command that control the siren. By my experience, this switch has not...

Hi @troelde, from your log, it's seems that the nginx server of your camera has problem (Bad Gateway). Reboot your camera and check if it solutes your problem. Sometimes, my...

Not sure that your last problem depends on the reolink_dev plugin. Take a look at this issue at the home-assistant/core github webpage : https://github.com/home-assistant/core/issues/73988

From your log, it's seems that you can't access to the https port of your camera (port closed?) :` Cannot connect to host 192.168.1.103:443` Check if you can open the...

hi, in the newer firmware of the AI cameras, the returned json from the GetAiState command had changed (taken from a RLC-810a, firmware : v3.0.0.412), here the newer one (face...

Another proof that the reolink api isn't reliable. They change the api when they want, it's different from a firmware version to another. We, developpers, aren't inform what's new AND...