fwestenberg
Sirene Switch
I have a reolink e1 zoom, through the app the siren button works normally. however, in the integration, I have a siren switch, which does absolutely nothing. what would be the function of this switch??
Hi @diogofm7 , This switch works only the the AI cameras because their firmware (3.1.x.x) contain the AudioAlarmPlay command that control the siren. By my experience, this switch has not effect with all the cams with the firmware 3.0.x.x and siren like the E1Zoom. Hope that Reolink add this command in the newer firmwares of the E1 Zoom (and also the PtzGuard commands) Regards
HI, i have a 823a camera, and i search the commands for siren on/off and LED on/off.
MNPG, you speaking of the switch for siren, can you say a bit more about it?
I would like use it in HomeAssistant. I use already the cam with (command topos) and it first preset (zoomed on the door of the home when sensor 'door opened' is on). For that i use the commands ptz and that works well. I wanted 1/ add the LED light ON too, but i find only command for the IR and nothing about LED. 2/ I using ALARMO too, i would like use the 823a siren, when a sensor active ON Alarmo, that send to me a SMS and ON all light of the home and activate the SIREN of the KEYPAD v2, then i would like too activated SIREN of the 823a in more. TY for help
