micv2
micv2
Ok, thanks for the info gyurco. Best regards, MiC
Sorry, unfortunately it doesn't work with Space. A minute is excessive, if I turn off MiST and wait 15 seconds, I can load the zx core again with ESXDOS.
Hi, this reset with the space key doesn't work for me, probably because I'm using a wireless keyboard. Couldn't the firmware (global) do it that way? Greetings, MiC Edit: I...
With core button it works, I pressed the board reset button. Sorry, my mistake. With the core and space key, ESXDOS can be restarted, thanks gyurco :)
Thanks for the reply. Which download should I use? V0.18 or V0.17 doesn't work 😒
Hi, I've finally done it. A fantastic update, thank you very much for your work 👍 Best regards, MiC 🙂
I also tried it on a TheC64. It doesn't work either. So it's an emulator problem. But it's really rare that the VICE fails.
Randy, that's good news. BMC64 definitely can't be upgraded to v3.7, or can it? A Raspi 3 is probably too slow..
I understand, a lot of effort. I was on holiday and built a BMC64 (C16 case) project. I really like watching scene demos and a few didn't want to. That...
Sir, I'm sticking with my Raspi 3. With Raspi 4 my craft project wouldn't work. Maybe the demo group just programmed it wrong ;-) Edit: The board from "Faszination C64"...