Micha

If you could guide me a bit I could do it and push it. Thanks, Mike

Hi, I have similar issue. After building the patch succesfully, there is no brcmfmac.ko file created which I can copy to the `/lib/modules/5.15.84-v8+/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/` In my patch folder I have the...

I am trying to parse MAC messages without any success.

Hi, Actually I am not using the start.sh script to start the dockers. I am just starting them through docker-compose from the terminal so I am missing the last bash...

Did you manage to run srsRAN 5G gNodeB using ANTSDR?

@platyman did you try to start the gNB with 10MHz or 5MHz bandwidth?

I also managed to run a 10MHz cell using ANTSDR. Although the cell can be seen from the UE side, I cannot register to it. Does this have to do...

Hi @pgawlowicz Here are the logs and config file. As you can see from the logs I get some strange results. ``` Like this one for example: The PRACH detector...

In my case I can confirm that that the UE attempts to connect. It successfully decodes SIB1 and it send multiple RACH requests which apparently never reach the gNB through...

Hi, any updates regarding this isssue? We are facing a very similar problem with USRP B205mini. In our case we are using the REF IN, which we connect to a...