Michael Hennerich
Michael Hennerich
libiio should support all aspects of IIO devices. Right now events are kind of unsupported. Support of events was asked here: https://ez.analog.com/linux-device-drivers/linux-software-drivers/f/q-a/104138/does-libiio-support-iio-events This issue/task is to track this development. If...
For reliable operation across the full range of supported interface rates. The AD5593R needs a STOP condition between address write, and data read (like show in the datasheet Figure 40)...
The ADL5580 is a high performance, single-ended or differential amplifier with 10 dB of voltage gain, optimized for applications spanning from dc to 10.0 GHz. The amplifier offers a low...
## AD9081/82 Support for M=1 with dts example iio: adc: ad9081: Add support for JESD204 M=1 (single ADC/DAC) iio: adc: ad9081: In full bandwidth/bypass mode use unmodified channels dts: zynqmp-zcu102-rev10-ad9082-m1-l8:...
https://github.com/analogdevicesinc/libad9361-iio/blob/93d4a2286dc599f6c73c7310257ef5b67f25bc38/ad9361_calculate_rf_clock_chain.c#L22
Disable input event deamon on Sidekiq Z2 #84
Don't start input event daemon - remove this line. https://github.com/analogdevicesinc/buildroot/blob/0d5db4a2804e9e5e8657fd3cba5d0329583ce8ed/board/sidekiqz2/post-build.sh#L57 And also clean up dts.