Mikhail Grushinskiy
Mikhail Grushinskiy
I had seen cases where serial wind sensor data would stop passing via signalk. Just restarting signalk would restore data flow. Currently in SignalK there is no keep alive check...
Canboat-js seems stops reading from NMEA 2000 after few minutes. Restarting just SignalK server restores data flow from NMEA 2000 to SignalK. After few mins data stops refreshing again. Reproducible...
A lot of accelerometer noise comes from sounds. Is it possible to use some kind of fusion algorithm of microphone and accelerometer data to reduce the noise in accelerometer? Or...
after reading more in the subject, wave surface is actually the surface of equal pressure. So basically barometer is useless for measuring wave height. It will pick up only noise...
Things are too small in many cases. minimal supported by BBN OS resolution is 1024x600 in some places fonts and icons can be made bigger by default. OpenCPN scaling on...
If a user installs OS with one touchscreen model and later plugs in different touchscreen model then /usr/share/X11/xorg.conf.d/90-touchinput.conf still contains old model. and user has to run calibration with xinput_calibrator
See: https://github.com/bareboat-necessities/lysmarine_gen/discussions/390
See: https://github.com/raspberrypi/linux/issues/6047
Touchscreen Copy/Paste functionality. Can it be made more user friendly?