meskilla

is there a shell script to safely unmount /tmp/sd first?

Alex, Is this the reason why the inactivity timer does kick-in during xvdr playback? It's quite annoying to disable all vdr messages just to get rid of those "vdr will...

> does analog audio work? > i have add dtparam=audio=on in config.txt snd-bcm2835 does not add the alsa compat sink necessary to use the headphone jack. This problem goes away...

I solved this with power off wait a few minutes then power on my DOCSIS modem. It turns out my provider is pairing MAC adresses with dynamic leases. That way...

Thank you for the script. The jffs2 both look fine so I removed /etc/back.bin and rebuilt both images following your backup instruction [notes](https://github.com/roleoroleo/yi-hack-MStar/wiki/Dump-your-backup-firmware#notes) Flashing worked fine and I got the...

ah look at that ... I noticed your configure_wifi.sh does raw write credentials into mtd5 with 2 seek offsets: ``` CURRENT_SSID=$(dd bs=1 skip=28 count=64 if=/dev/mtd/mtd5 2>/dev/null) CURRENT_KEY=$(dd bs=1 skip=92 count=64...

Thanks for confirming, you do write a "\0\0\0\0" bit to flag the connected state, what should this look like if the cam is disconnected?

It worked! now the welcome message is playing again. mtd enumeration must have changed from firmware 4.6 to 4.9 - with fw 4.6 the last partition is mtd5 not mtd6.

@bjlockie: I have Ubuntu Noble 24.04 on standby, that will ship kernel 6.8, is this kernel worth testing against rtw88_8821cu ? Another option is kali-rolling. On Kali I did prefer...

hello nick, lsusb's with the device plugged directly into a usb 3.0 port (no hub in between, no cable) lsusb before modeswitch (CD-Mode) > Bus 008 Device 003: ID 0bda:1a2b...