Michael Büsch

Are you sure this really is a DeathAdder 3500 DPI? If so, Razer seems to have created a new device with an old name.

Thanks for the USB report. This is a new device that is unsupported until somebody reverse engineers the wire protocol.

https://bues.ch/h/razercfg#how_to_add_support_for_new_devices

Please capture the bus communication with the original Windows driver and look for differences in the protocol.

@rainbowjose, such profanity is not acceptable here, so I deleted your post. You are welcome to contribute to this project; in English and without using swearwords. Thanks.

This device is not supported, yet.

> I don't have nor want Windows, so I can't capture usb traffic from the official driver to find the magic numbers and message structure. That's bad. I strongly suggest...

> The protocols have to be pretty close if the firmware request works, though. I would not count on that. > I might still have a KVM install of XP...

I think currently nobody is working on a mamba driver. However, pull requests are welcome. So don't hesitate to start an implementation, if you want to.

Well, it looks like you captured the correct data. I did not check what format that is. But you can easily do that on your own. First check whether it's...