Mark
Mark
right, you can use all the pins in exp1, like the 5v,ground and any other pins in exp1 for the clk and sda.
the PA8 is OK, because it is connected to the mcu directly and no capacitor on that pin, we need to avoid the endstop pins.
There is a progress for Bed Distance sensor working with klipper: can display the distance value on screen, homing, and still need some work for the probe, calibration ... ...
> Awesome! Really very interested in this. Does it work with a pei bed surface being magnetic? I have glass ATM. But thinking about getting pei. yes, I also test...
then you can check if the led is on or off after letting a metal under the coil. and if you have multimeter, you can also check if there is...
what's the CAN bus speed while make menuconfig? if it below 1000000 you can try to increase it.
Not sure, I need to think of that to see if it is possible. > BTW, for I2C reading, I see that the code use while loop for waiting, is...
how about decrease the delay value from 20 to 19 18 17 ? but need to make sure the data from bdsensor is right e.g M102 S-1
BTW, I also have met this timeout problem with EBB36 in random even without BDsensor before. I do believe this problem is caused by the busy of process by the...
check the section name [BDsensor] and the first two word is capitalize, other words are lower case