malte0811

You need to connect the HV relays in vertical columns, each one to the one directly above it. The rendering in the manual for that is kind of broken, no...

Running the MG is more complicated than just giving it an RS signal on the white channel. White and yellow set the charging voltage, your charging voltage is a bit...

You can't process a single piece of iron ore efficiently, the ideal voltage for that is too low. For two blocks of iron ore 10 white, 1 yellow is ideal....

This is somewhere between "bug" and "intentional". I know they store that much, and I meant for them to store that much, but it isn't ideal. You will probably get...

If you connect a batbox to an EV transformer and connect that to a luminator the same thing will happen, but twice as bad (16k EU storage). Chocohead (IC2 dev)...

I haven't tried this yet, but from what you said the net would consider them all to be the same/have lossless connections. Is that right or did I misunderstand something?...

I played around with `IMetaDelegate` for a bit. It would be perfect if I didn't need the losses. For losses to work I'd need to know how much energy was...

The problem is that a connector does not have a fixed length of wire attached to it, with a single other end. It has a graph that can be as...

I thought about using dummy nodes outside of the normal building range before, there are 2 issues with that idea: 1. It would cause issues with CubicChunks (not too important,...

This didn't work as intended in some cases. Connectors would still blow up when connected to a "matched" source (e.g. tin wire and a batbox) using a cable (but not...