MKS-TFT

MKS-TFT copied to clipboard

TFT 35 issue

27

Hi Guys , I know its a bit strange but i tried to flash Btt tft 35 firmware to mks tft 35 bcz its open source but my screen has...

fnhhnxfn

Which firmware to choose for MKS TS35 V2.0 ?

18

Hello I am unable to flash the my MKS TS35 V2.0 with the tft35_V1.0.8_English version. Do I have to change the .bin name ? Is it the right firware for...

ImmortalTeknik

Is it possible to upload pic and font files with the programmer, if so, at which addresses are those files? My display is MKS-TFT35. Thanks ! 

freetoair

A couple of doubts before updating

5

I have an old replicator dual with sailfish 7.7, I was wondering if I can use this firmware to install it directly on the screen and it would be compatible,...

beckmx

Adding M117 / M00 to the TFT Firmware

12

This is a message specially for the developers at MKS. To make the MKS TFT Display fully useable you have to add the Feature, that the Display can show M117...

Rics3D

Hi, I have this issue that is I want to add custom button to open the lights and close them. I connected the led wires onto the main board. I...

Asafbucak

MKS TFT V3.0.2 M Codes in Custom buttons don't seem to work

9

Hi, I have been trying to use M Codes in custom buttons for babystepping and BL Touch controls but with no success. G Codes seem to work fine though. An...

Bobblejot

SBASE V1.3 & TFT35 disconnect always

2

preconditions_ Controller: MKS TFT35-FW / Firmware smmoothieware-cnc.bin Display: MKS Base V1.3 Board Firmware MKS_TFT35_laser_V1.0.3 Connections: No connections to USB or COM Baudrate: tried all wirering: nearly nothing only X &...

beatkipfer

MKS TFT35 LASER UI

4

I'm having an issue with the UI on my MKS TFT35 board. I recently bought it to upgrade an existing homemade laser. The issue is that no matter firmware I...

EBurgan

Hello, I wanted to upgrade to version tft35_V1.0.8_English for MKS 35, but i faced this error when i wanted to print. I do not have a filament detection device, but...

BetulSBoyali