Sylvain

I fixed it ! I made my own lib ^^

Works for me now. Just don't use the UART for tmc220x and that will solve your problem. I'm going to switch to the Sgen L.

> > Works for me now. Just don't use the UART for tmc220x and that will solve your problem. I'm going to switch to the Sgen L. > > >...

> So, your bltouch is works when wiring is OK? For me, it's the BLTouch or the UART for the TMC2209 ...

> forgot to include the other config files I editted. This one contains all of them. > > > > [config0916.zip](https://github.com/makerbase-mks/MKS-SGen/files/5234699/config0916.zip) > > Do you want my config ?

> > > > > Do you want my config ? > > > > What motherboard were you using before switching to the SGEN_L? Can't hurt to see your...

 [Configuration.h.zip](https://github.com/makerbase-mks/MKS-SGen/files/5250517/Configuration.h.zip) As you can see : Servo side : Signal on P1.23 ground on the same connector than the P1.23 ( 2P left ), 5V on the Z endstop...

I will check my endstop status. Sadly I ordered the V1 of the Sgen L, but it was on amazon, so I'm just going to send it back. I really...

Good you got a V2. I sent back mine, waiting for Amazon to sell the V2. I have the TFT35 and so many bugs too. i should've stayed with my...

I'm running marlin 2.x. The problem is, when you go to that screen, the soft don't send a 501 to get the previous value and display automatically 0 as value....