Davide Gironi
Davide Gironi
Just like using the 'LCSC Part #' property to auto compile the JLC part number, it would be useful if the 'JLCPCB Rotation Offset' were implemented as a Rotation table...
Hello, I'm building a softcore based on Briey. I've the AxiCrossbar without Sdram and on the APB3Bridge 1 Timer, 1 UartCtrl, 1 Gpio. On the APB3 I would like to...
Hello, I'm trying the Murax soc on a Tang Nano 9k. MuraxWithRamInit works with no issues. I'm able to run the demo, and to compile custom C software. Now I...
Hi all. I'm using Sharppcap Npcap mode to receive and send Ethernet II RAW packet. I've notice a behaviour I'm not able to explain myself. I suppose it's related to...
Hello @WangXuan95 and thanks for this IP, it saves me a lot of time. I've ported your code to Verilog. I'm working on a ECP5 Lattice, running at synchronous mode...
Hello Alex, I'm using your library on a Xilinx Zynq (PL side) with a dual gigabit PHY. I use this both for UDP and RAW packets. No problem whatsoever. I'm...
Hello, I would like to use this core in conjunction with your UTMI to ULPI, connected to a USB3300, possibly in High Speed mode. My final goal is build a...
Hello Alex, I'm yet using your Ethernet module as may you know by my previous request. I'm now facing out to the FT245 module. Do you have the Synchronous FIFO...
Hello, I'm using your proto245 in sync mode on a FT2232H, clock at 60Mhz. Lattice ESCP5 running @ 50Mhz. I've setup IN and OUT delay like your example de10lite (8.333...
**Describe the bug** Rotations not working for SOT-23-6 package **To Reproduce** Add a Package_TO_SOT_SMD:SOT-23-6 footprint component Check Rotations Manager: ^SOT-23-6 = 180 Generate production files The SOT-23-6 is 90 degree...