OpenBVE
OpenBVE copied to clipboard
leezer3
OpenBVE- A free train simulator
### Description It seems that Object Viewer still doesn't use the locoBrakeNotches variable. When I Reset Train Settings, locoBrake Notch and locoBrake Notches do not reset to 8 like the...
This PR allows us to couple to loose cars that we've previously dropped. Currently, driving into a train with both at less than the critical collision speed (this is a...
### Description My crossing in front of Morioka is written with the distance and number shows below.  Rail4 is an upward track and distanceX is always 4.3m from Rail0....
### Description After the train passes forward through SwitchT, the train does not reach the first track, but runs on the void track extended by the last section of the...
https://github.com/leezer3/OpenBVE/issues/1009 Unfinished WIP. ### Current progress: The creation of objects (in master) uses a large number of parameters, which are often passed through two or three levels of function calls....
### Description Relative #1007 Crosshatch's https://kanakyusubway.web.fc2.com/bve/route/chiba/ I heard from Crosshatch about how NearestTrainFilter works. According to it, previously, trackDistance and Doors only responded to the train that is in operation,...
### Description - Announce with speed The axle of each car will trigger a sound, and the rear axle of the last car will not be triggered. - AnnounceAll with...
## Description Command example > Track.Joint JSnd;Trigger;Interval > - Option for JSnd: > Index: Use the corresponding point sound of the train. > A sound file: it's similar to the...
There is already hmmsim 2 that can convert BVE routes, but the latest phones do not support it. For example, in the case of the latest phone, the Galaxy S24,...
   I also faced now another kind of issue... When I opened an extensions.cfg file of a train in Object Viewer, I saw these errors. There are 2...