Jasem Mutlaq comments

Results 389 comments of


                                            Jasem Mutlaq

Exposure timeouts with Toupcam USB2 cameras

@bgilsrud I don't recall if this was already fixed or not?

RPI-Driver unable to recognise v1 camera

@lboclboc Can you please check this out?

RPI-Driver unable to recognise v1 camera

@damienh same issue with recent driver?

Minimal exposure time is 1/10 for Sony DSLR in INDI and in EKOS (astroberry 2.0.4 setup)

Driver log?

Minimal exposure time is 1/10 for Sony DSLR in INDI and in EKOS (astroberry 2.0.4 setup)

Please check here: https://indilib.org/individuals/logs-howto.html

Minimal exposure time is 1/10 for Sony DSLR in INDI and in EKOS (astroberry 2.0.4 setup)

I see all taken with bulb exposure mode so this is why you can't get very low. If you disable bulb exposure in INDI --> Options then you said it...

Minimal exposure time is 1/10 for Sony DSLR in INDI and in EKOS (astroberry 2.0.4 setup)

I tested with Canon 600D (Force Bulb enabled) Nikon D3500 (Force Bulb disabled) and I can get 1/1000 and 30+ second image just fine with both cameras. Not sure what's...

Minimal exposure time is 1/10 for Sony DSLR in INDI and in EKOS (astroberry 2.0.4 setup)

@rkaczorek Maybe set Force bulb to OFF in Options? or that doesn't help?

celestron-aux Missed move command in one axis

For this driver specifically, there are multiple translations steps since it goes via the mount model. Enable logging to see what actually happens at the lowest level, this is only...

celestron-aux Capture and solve always slew to target while allowing taking pictures

This looks like an Ekos issue and not INDI.