KJNgineering

Slow library import time

9

I have been attempting to use python-can on an embedded buildroot system, which essentially will be a CAN based display. Hardware is relatively low level, single ARM Cortex-A7 1.2GHz, 64mb...

Hi, On version 1.2 of the datasheet of T113-S3, the CAN bus peripheral was added. It is assumed that the this peripheral is the same as A10/20 and the new...

I think it makes sense to give the option to route the USB signals to the white AMP connector. Replacing the (un-needed) grounds at pins 1-4. This would allow a...

Add switchable RC circuits to support LSU-4.9 and LSU-ADV?

10

Much like the ST driver it makes sense to have switchable RC circuits to support different sensors. Eventually the LSU-ADV will become the standard part.

The MoTeC LTC (Lambda to CAN) devices are essentially the exact same functionality of this device. The price of the MoTeC devices are ~$380USD for the single channel version and...

Improve control options for fan outputs/control.

1

There are several OEM PWM fan controllers available and SPAL has a range of PWM controlled brushless fans, currently FOME has no good method of control. Technically this is possible...

For users that use PDM's its common than instead of hard wiring an output from the ECU to the PDM to control the switching, the state is usually read over...