kipper2k

here is a schematic of the pinout if this is any help...https://shema.info/en/television-and-video/5556-ps-one-schematic-diagram.html here is a pdf of the DAC, it is not a fine pinned chip so a layon/over pcb...

Hi, sorry i missed respoding in the other thread, i just tested my a508ide board, IDE works, there are quite a few jumpers on the underside where i forgot needed...

@IanSB thanks for info, i will try this later today... edit, i tried swapping the jumper and i ended up with the blinking... http://www.kipper2k.com/pics/rev3blinking.mp4 i tried changing pal/ntsc mode and...

k, its working, i need to tidy it up and then i will show some pics etc

using this... /CDAC, pin 34 on Denise, is available on Gary, pin 26 - Gary is U5, a 5719 near the center of the motherboard. /CSYNC, pin 32 on Denise,...

Here is a picture of the underside of the Rev3 A500. The yellow wires show what is needed to be done to get the HDMI working. Doing this means you...

awesome, my a1000 is an NTSC version and i think it is different, the schematics are very poorly photocopied and i am having a hard time reading it. From what...

here is a link... www.kipper2k.com/a1000.zip

thanks for lookin, i ill try it out tomorrow

I connected pb15 from the bluepill to pin 18 of the PiZero via a 1k resitor (using the new beta15 files) and couldnt see any OSD. Not sure if it...