Jesse Schoch

The "Diameter" in probe tip/tool threw me off. I had it set to 0. Many of the settings in the probing tab are ambiguous, for instance what is the difference...

it doesn't have to be a full blown wizard, it should make it obvious which fields are specific to the probe setup and type. If that is simply enabling fields...

Yes, that works, any pointers so i stick to your intended use of the tabs?

I'll give it a try and let you know where to take a look. Bart's created a new setting to prevent the issue $Probe/Protection={Off, Reset, or Feedhold}. I've tested with...

regarding priorities i'd prefer to have corner probing, circle center finding, and cylinder center finding before autolevling. Have thought about how a plugin system would work or if you'd prefer...

bCNC has a lot of the features but the workflow is not great. UGS seems buggy. I have only dabbled with others. I'll try to get VS installed so I...

found some c# autolevel code https://github.com/martin2250/OpenCNCPilot/blob/6bfd8243a42299f0eb7dae9adac9b9cfe96e71a0/OpenCNCPilot/GCode/HeightMap.cs

i has first C# and first wpf ever!!!!!  I have not done objects in a while, so much hidden magic! any tips on where you are picking...

thanks for the tips! i've done react and elm so it seems I should be able to get up to speed with MVVM but my time in functional programming land...

I'm still interested. I moved and I also got a tig welder so I have been a bit distracted but my new cart for my mill is all melted together...